Follow us :

fren

PACKAGING

Bonding and Lithography Equipment Market for More than Moore Devices

Published
21/11/2018
Product code
YD18038
Price
EUR 6 490
Applications
Industrial
Available sample Available flyer Ask for info

More than Moore devices fueled by megatrend applications will strongly drive the growth of the lithography, permanent bonding, and temporary bonding and debonding equipment market.

DRIVEN BY MEGATREND APPLICATIONS, MORE THAN MOORE (MTM) DEVICES COULD DISRUPT MAINSTREAM BONDING AND LITHOGRAPHY TECHNOLOGY ADOPTION

Megatrend applications like 5G wireless technologies, electric vehicles, and advanced mobile devices demand miniaturization and extra functionality. Therefore, fabricating the next MtM device generation requires tools with new technical specifications. These are very different to the “More Moore” mainstream semiconductor industry with respect to resolution, overlay, depth of focus (DOF), wafer bow and backside alignment.

MEMS, sensors and power devices have more relaxed specifications, so that mask aligner tools are sufficient at lower cost. However, megatrend applications are pushing devices with more stringent requirements, with lithographic features below 1μm. This would pave the way towards greater adoption of stepper tools.

Wafer-to-Wafer (W2W) bonding is fueled by MtM devices. It’s currently supported by CMOS Image Sensors (CIS) based on fusion bonding, which enables Phase Difference Auto Focus (PDAF) as well as faster shooting. Nevertheless, W2W process growth will be led mainly by potentially integrating hybrid bonding with no Through-Silicon Vias (TSVs). Such processes could be used in new consumer CIS approaches such as global shutter and Time-of-Flight (ToF) technology and also the automotive industry in advanced driver-assistance systems (ADAS). Looking ahead, emerging mainstream products such as 3D NAND memory and 3D Systems on Chips (SoCs) are expected to reshuffle the W2W business in the next few years. They will replace die-to-wafer (D2W) and wire bonding, in order to maximize the number of memory cells and yield and solve stacking layer limitations.

We had expected W2W production to pick up earlier for 3D DRAM stacked memories. However in reality, cost and technical aspects today firmly limit adoption of W2W to replace D2W assembly methods.

This report presents a comprehensive overview of the status of the three equipment types used for MtM devices, along with a more in-depth analysis of technology trends and impacts made by the megatrend applications.

MORE THAN MOORE INDUSTRY MANUFACTURING COMPLEXITY BRINGS NEW BUSINESS OPPORTUNITIES IN BONDING AND LITHOGRAPHY EQUIPMENT MARKETS

The overall semiconductor equipment market is worth several billion dollars. By contrast, the permanent bonding, temporary bonding and debonding and lithography equipment market for the MtM industry is a small niche representing millions of dollars.

However, megatrend markets push MtM devices to new levels of complexity, resulting in big investments. Consequently, the total equipment market for these process steps generated revenue of more than $400M in 2017. It is expected to peak at ~$750M by 2023, with a 10% compound annual growth rate (CAGR) over this period. This is mostly driven by lithography, followed by W2W permanent bonding.

The new lithography equipment market for MtM devices is mostly driven by advanced packaging. This sector accounts today for almost 60% of the overall MtM lithography tools market and will continue dominating this industry with stepper technology.

Meanwhile, a high percentage of lithography equipment revenue for MEMS and sensors, CIS and power devices comes is generated by retrofitted tools coming from the legacy semiconductor industry. Nevertheless, new lithography systems will be shipped to meet smaller alignment and feature sizes, where older tools will face limitations.

The W2W bonding market is mostly driven by CIS imaging and is expected to be fueled by emerging CIS products. However, new mainstream semiconductor applications such as 3D NAND and 3D SoC will also strongly push W2W bonding market growth over the next five years.

Temporary bonding and debonding still represents a rather small niche reaching more than $55M revenue in 2017. Yet it‘s been already applied in numerous MtM areas such as 3D TSV platforms, fan-out wafer level packaging (FO WLP), MEMS and sensors, power devices and photonics applications.

From a technology point of view, laser debonding represents the dominant technology widely used today for FO WLP and 2.5D interposer packaging. It is expected to remain the leading process, mainly supported by the major memory manufacturers such as Samsung, SK Hynix and Micron. These companies are expecting to transition from mechanical debonding/slideoff debonding to laser debonding for the next generation of HBM2 memory due to yield issues and to support the future high volume production forecasted by end of 2019.

This report offers a detailed analysis of the MtM equipment market forecast by volume and value, for the 2017-2023 timeframe, broken down by MtM segment application and by technology.

MORE THAN MORE DEVICES LEAD TO A MUCH BROADER BONDING AND LITHOGRAPHY LANDSCAPE

When looking at the competitive landscape, the MtM equipment market is diversified, with groups of equipment vendors coming from different angles.

As such, the bonding equipment market is highly concentrated under the control of specialist equipment suppliers, like EVG and SUSS MicroTec. These companies have developed expertise in very specific equipment lines where legacy equipment suppliers do not have the capabilities to support such processes. The exception is Tokyo Electron Limited (TEL), which is very active in the permanent bonding equipment.

In contrast, the lithography equipment landscape for MtM devices is fragmented in different ways since it is served by two main company types:

  • Specialist equipment vendors like Veeco, EVG, SUSS Microtec, SMEE, who offer brand new lithography tools specifically for the MtM industry
  • Top-tier semiconductor equipment suppliers like ASML, Canon, Nikon, mostly supporting refurbished equipment

However, the equipment landscape is currently evolving towards greater diversification in both bonding and lithography. For instance, Asian equipment vendors have recently created strong price pressure and could reshuffle the MtM equipment market. New Chinese local players benefit from strong subsidies from local governments. They have entered the market and started competing with the top players. SMEE today is the dominant Chinese company, holding around 70% market share of the domestic LED market in terms of volume, providing low-cost bonding and lithography.

Some other Asian equipment suppliers include Korean company EO Technics, and Taiwanese company Kinyoup Optronics, offering laser debonding processes mostly dedicated to FO WLP.

Meanwhile, in the quest to acquire market share in the MtM industry, large semiconductor Front-End or Back-End equipment suppliers have adopted different strategies. They are expanding their lithography activities through acquisitions of other companies to diversify and complete their product portfolio. For example, ASML spin-off Liteq was acquired by Kulicke & Soffa, Veeco bought Ultratech and KLA Tencor purchased Orbotech.

Finally, Canon, a key front-end lithography equipment supplier, is challenging MtM suppliers by developing brand new tools at a reasonable cost. In addition, they recently skipped a step in the bonding business by leveraging their physical vapor deposition (PVD) capabilities to launch a permanent bonding tool based on metal interfaces.

This report quantifies and details the competitive landscape and major bonding and lithography equipment supplier markets by MtM devices.

WHAT’S NEW

  • Update of our 2017-2023 equipment market forecast with unit and market value: split by MtM device and by equipment type
  • Updated technology trends analysis across MtM devices and technology roadmap
  • New analysis based on competitive landscape for each equipment and technology roadmap
  • Comparison between new brand and refurbished equipment by MtM device

Note from the publisher: the report will be available from December 3, 2018

 


 

LINKED REPORT

Wafer to Wafer Permanent Bonding Comparison 2018 – by System Plus Consulting

Wafer bonding structure, process and cost analysis for CMOS image sensors, inertial, pressure and radio-frequency MEMS devices and LEDs.

Bundle offer possible for the Bonding and Lithography Equipment Market for More than Moore Devices Report by Yole Développement, contact us for more information.

COMPLETE TEARDOWN WITH:

  • Package views and dimensions
  • Package cross-sections
  • Precise measurements
  • Wafer bonding process description
  • Cost analysis
  • Cost comparison

Get more here

Back to top

Introduction, Definitions & Methodology 6


Executive summary 20


Introduction to More than Moore (MTM) devices 43


> Key drivers for MTM growth- (Advanced Packaging, MEMS &
Devices, CMOS Image Sensors (CIS), RF, LED, Power): Megatrends applications

 

Equipment overview for MTM devices 54


> Bonding & lithography processes in the MtM field
> Competitive landscape

 

2017-2023 Global Equipment market forecast 84


> W2W Permanent bonding equipment market forecast (Unit and Revenue)
> Temporary bonding & debonding equipment market forecast (Unit and Revenue)
> Lithography equipment market forecast (Unit and Revenue)

 

Litography equipment 96


> Lithography equipment technologies by MTM device overview
> Technology nodes and resolution roadmap

 

Advanced Packaging lithography 115


MEMS lithography 148


LED lithography 160


Power lithography 174


CIS lithography 182


Lithography equipment vendors benchmark-MTM industry 187


PART 2: BONDING EQUIPMENT 202


> Status of Permanent bonding technology – roadmap

 

W2W permanent bonding 214


> W2W permanent bonding technologies overview and applications

 

MEMS permanent bonding 219


CIS permanent bonding 262


RF permanent bonding 269


LED permanent bonding 280


SOI permanent bonding 291


Emerging applications 295


> 3D NAND, 3D SoC, 3D stacked DRAM

 

Temporary bonding & debonding equipment 304


> Temporary bonding & debonding drivers and applications
> Temporary bonding & debonding equipment suppliers – landscape
> Carrier wafers

 

Conclusions 363


Appendix 372

Back to top
© Copyright 2018 SYSTEM PLUS CONSULTING SARL l Tous droits réservés l Legacy Mentions