Follow us :

fren

PACKAGING POWER

Power Module Packaging 2018: Material Market and Technology Trends

Published
26/07/2018
Product code
YD18032
Price
EUR 6490
Applications
Available sample Available flyer Ask for info

Power packaging is continuously adapting to power application market trends.

THE IGBT POWER MODULE MARKET GREW 18.1% IN 2017, DRIVING THE POWER MODULE PACKAGING MATERIALS BUSINESS

2017 was an impressive year for the IGBT power module market, as it grew 18.1% compared to 2016. And so far, the perspectives for 2018 are even better, with over 20% growth in the first half of the year. The main explanation of this drastic market explosion is the boost from the electrical and hybrid electric vehicle (EV/HEV) sector, especially in China. It has also been an exceptional year for industrial motor drives in Asia. Other device modules, like those based on MOSFETs and bipolar transistors, show a slight decrease. Consequently the overall power module market value ended at $3.54B, growing 11.3% year-on-year. By 2023 the market is expected to be over $5.5B. This promising market is beneficial for the packaging material business that Yole Développement (Yole) covers in this report, “Power Module Packaging 2018”.
The power module packaging material business is worth $1.2B, a little more than a third of the total power module market. It is a very dynamic market, where continuous innovations and material enhancements and a lot of R&D investment are needed. This power module packaging material market’s compound annual growth rate (CAGR) for 2017-2023 will be 8.2%, coming close to a $2B business opportunity by 2023.
In terms of technology, the report takes a deep look into substrates, baseplates, die-attach, substrate-attach, encapsulation, interconnections and thermal interface material (TIM) markets. Almost 50% of the current $1.2B market value is substrates and baseplates. Another 25% of that market is exclusively from die-attach and substrate attach materials. Major technological choice trends in these segments can therefore rapidly impact the power module packaging overall market.
For instance, the penetration of silver sintering as a die-attach technology is increasing among the industry, and even arriving in some EV/HEV power modules. As this technology is more expensive, the CAGR2017-2023 for the die-attach market is 11%, much higher than for the other market segments. The second highest CAGR2017-2023 is for interconnections, at 9.5%. This is because new interconnection technologies, like flexible interconnection foils, are more costly compared to more cost-effective but less reliable aluminum wire-bonding. The other major technological change that will impact the global market will be an increasing use of silicon nitride (Si3N4) active metal brazing (AMB), which will capture 37% of the power module substrate market by 2023. As the demand for Si3N4 increases, its high cost is expected to decrease faster than the other ceramic materials.

SILVER SINTERING, NEW SUBSTRATES AND INTERCONNECTION TECHNOLOGIES ARE THE LATEST INNOVATIONS DRIVEN BY EV/HEV AND THE ARRIVAL OF WBG

Technical trends in power module packaging are mainly driven by the entrance of the Wide Band Gap (WBG) materials and the challenging system requirements of the booming EV/HEV industry. Indeed, the introduction of the WBG semiconductors SiC and GaN is pushing the development of new power packaging solutions, as these devices can work at higher junction temperatures and higher switching frequencies with smaller die sizes.
In order to take advantages of SiC’s properties, reliable and robust die attach technologies that work at 200 °C are required. Silver sintering is today the big star for SiC power modules, due to its high melting temperature point, exceeding 900°C. In term of substrates, high thermal conductivity materials will be chosen such as AlN and Si3N4, as dies need to dissipate the losses from a smaller surface. In addition, the interconnection technology is a key factor for the good performance of SiC devices. Many companies are therefore developing their own low-stray inductance interconnections such as GE’s Power Over Lay (POL) or Semikron’s SKiN technology. In contrast, GaN devices are not yet packaged in power modules, and are using advanced packaging technologies. GaN Systems’ printed circuit board-embedded GaN packages are the best example.
The EV/HEV industry’s demanding requirements for high power density and mechatronics integration are driving many of the other power packaging innovations. Today, there are two clear trends: over-molded double-side cooled modules for hybrid cars and single-side cooled modules with pin-fin baseplates for battery-only electric cars. This report summarizes other tendencies such as the use of organic insulator foils in insulated metal substrates (IMS) and the “integrated substrates” that merge a ceramic substrate and a pin-fin baseplate. With all these new technologies, the EV/HEV power packaging landscape is fast-evolving and dynamic. That is why Yole follows the leading packaging material suppliers like DOWA, Denka, Rogers and Alpha, and the module manufacturers like Bosch, Mitsubishi Electric and Semikron, very closely to quickly understand their future technology innovations.

NEW: A WBG PACKAGING CHAPTER, TESLA’S MODEL 3 POWER MODULES AND MITSUBISHI ELECTRIC’S J1 SERIES INNOVATIVE INTEGRATED SUBSTRATES

The Power Module Packaging 2018 report has several new features, including an entire chapter which focuses on WBG module packaging challenges, innovations and future trends. Yole has also introduced the TIM market and its forecasts as part of the power module packaging market, building on the 2017 report, where just the different TIM technologies were described. Yole’s analysts have also now analyzed the Transient Liquid Phase Soldering (TLPS) technology as a future alternative to die-attach.
An exciting, fresh, case study explores Tesla’s Model 3 power module, which has been manufactured by STMicroelectonics and reverse engineered by System Plus Consulting. Similarly, photos and an explanation of Mitsubishi Electric’s J1-series power module, with its very innovative integrated ceramic and baseplate pin-fin substrate design secrets. The Power Module Packaging 2018 report will bring you all these latest innovations and much more.

 

OBJECTIVES OF THE REPORT

This report’s objectives are to:

  • Provide power module packaging market analysis and forecasts
  • Provide a deep insight into state-of-the-art package designs and materials
  • Describe the current packaging challenges for SiC and GaN Wide Band Gap devices
  • Identify the key technology trends that will shape the market in the future
  • Understand the main challenges and proposed innovations
  • Provide supply chain analysis and trends

ASSOCIATED REPORT

MEMS Pressure Sensor: Structure and costing comparison of 34 MEMS pressure sensors from 18 different manufacturers in consumer, automotive and industrial applications 2018MEMS Pressure Sensor Comparison 2018 – by System Plus Consulting

Structure and costing comparison of 34 MEMS pressure sensors from 18 different manufacturers in consumer, automotive and industrial applications.

 

 

COMPLETE TEARDOWN WITH:

  • Package views and dimensions
  • Package cross-sections
  • Precise measurements
  • Die descriptions
  • Technology descriptions
  • Cost analysis
  • Cost comparisons

Get more here

 

Back to top

Objectives of the report 4

What is in this report? 5

Companies cited in the report 6

List of abbreviations 7

Executive summary 8

Overall power electronics market 37

Power module market 42

Global trends for power module packaging 48

Thermomechanical issues in power modules 63

Power module packaging 71

Composition of a conventional power module 73

Power module materials and process choice 77

Interconnections 82

Die and substrate attach 97

Encapsulation 121

Substrates 139

Baseplates 156

Thermal Interface Materials (TIMs) 172

Power modules – case studies 193

Raw materials market for power packaging 208

Yole’s methodology for market metrics 209

Interconnections in power modules 211

Die attach for power modules 215

Substrate attach for power modules 220

Encapsulation for power modules 225

Substrates for power modules 230

Baseplates for power modules 235

TIM for power modules 240

Business model and supply chain analysis 245

Wide-band gap packaging 286

General conclusions 305

Yole Développement presentation 310

 

 

 

Back to top
© Copyright 2018 SYSTEM PLUS CONSULTING SARL l Tous droits réservés l Disclaimer l Term of use l Privacy policy l Webmaster